Products > DNA Extraction > Plasmid DNA Purification

96 Well Plasmid Kit (96PDC04/96PDC10) (96PDV04/96PDV10)

96 Well Plasmid Kit
96 Well Plasmid Kit (96PDC04/96PDC10) (96PDV04/96PDV10)
The Presto™ 96 Well Plasmid Kit was designed for high-throughput purification of plasmid DNA from 1-5 ml of cultured bacterial cells per well using an efficient 96 well filter plate and 96 well binding plate system. A modified alkaline lysis method and RNase treatment are used to obtain clear cell lysate with minimal genomic DNA and RNA contaminants. Typical yields are 20-35 μg for high-copy number plasmid or 3-10 μg for low-copy number plasmid from 4 ml of cultured bacterial cells. DNA phenol extraction or alcohol precipitation is not required and the entire procedure can be completed within 25 minutes. The purified plasmid DNA is ready for use in restriction enzyme digestion, ligation, PCR, and sequencing reactions.
 

 

 

Advantages (Cat. # 96PDC04, 96PDC10, 96PDV04, 96PDV10)

  • Purify 96 wells of pure plasmid DNA in 25 minutes!
  • Sample Volume: 1-5 ml of cultured bacterial cells per well 
  • Yield: 20-35 μg per well (high-copy plasmid), 3-10 μg per well (low-copy plasmid)
  • Binding Capacity: 35 μg per well
  • Plasmid Size Range: 1-20 kb
  • 96 well plates for filtration and DNA binding
  • Elution Volume: 60 μl from 100 μl elution buffer volume
  • Centrifuge or vacuum manifold protocol
  • Storage: dry at room temperature (15-25ºC)

Applications

Fluorescent and Radioactive Sequencing, Restriction Enzyme Digestion, Library Screening, Ligation, Transformation and PCR

Components

  • PD1, PD2, PD3 Buffers
  • W1 Buffer
  • Wash Buffer
  • Elution Buffer (10 mM Tris-HCl, pH8.5 at 25°C)
  • RNase A
  • Presto™ Plasmid 96 Well Filter Plates
  • Presto™ Plasmid 96 Well Binding Plates
  • 96 Deep Well Plates
  • 0.35 ml Collection Plates
  • Adhesive Film

Quality Control

The quality of the Presto™ 96 Well Plasmid Kit is tested on a lot-to-lot basis by isolating plasmid DNA from a 4 ml overnight E. coli (DH5α) culture containing plasmid pBluescript (A600 > 3.7 U/ml). Following the purification process, a yield of more than 20 μg per well is obtained and the A260/A280 ratio is between 1.8-2.0. The purified plasmid DNA (1 µg) is used in EcoRI digestion, and analyzed by electrophoresis.

Presto™ 96 Well Plasmid Kit Interactive Protocol
 
 
Presto™ 96 Well Plasmid Kit Sequencing Data
Figure 1. Sequencing data of (pBluescript) plasmid DNA purified using the Presto™ 96 Well Plasmid Kit.
E. coli Culture Volume
260/280
260/230
Average Yield
1.5 ml
1.90
2.10
13.9 µg
5.0 ml
1.90
2.10
33.0 µg
 
Table 1.  Yield and quality of plasmid DNA purified using the Presto™ 96 Well Plasmid Kit. 5 µl aliquots of a 60 µl eluate of purified super coiled plasmid DNA from 1.5 ml and 5 ml overnight E. coli (DH5α) culture, containing a 3 kb plasmid pBluescript (OD600 = 3.7 U/ml) were EcoRI digestion and analyzed by electrophoresis on a 0.8% agarose gel.
Plasmid DNA Kit Specifications
Specifications Geneaid™ Mini Plasmid Kit
Cat. #
PDH100
PDH300
PD100
PD300
PDL100
PDL300
96PDC04/10
96PDV04/10
 PAE040/100
Format Spin Column Spin Column Spin Column 96 Well Plate Anion Exchange
Binding Capacity 50 µg 30 µg 30 µg 35 µg 25 µg
Culture Input 1-7 ml 1-5 ml 1-4 ml 1-5 ml 1-10 ml
Plasmid Size 1-15 kb 1-15 kb 10-50 kb 1-15 kb 1-15 kb
Typical Yield up to 50 µg 10-30 µg 10-25 µg 20-35 µg/well 10-25 µg
Elution Volume 30-100 µl 30-100 µl 50-100 µl 100 µl 50-100 µl
Operation Time <15 minutes <15 minutes <15 minutes 25 minutes 80 minutes
Related Plasmid DNA Purification Products

 

                                       

  

 

 

 

back to previous page